CCS: PC-Lint with Code Composer Studio v6.2.0.00050

Jay Patel

Other Parts Discussed in Thread: CC3200

Tool/software: Code Composer Studio

Hi,

I am using CCS (on Windows) for CC3200 firmware development. I have PC-Lint (static analysis tool - http://www.gimpel.com/html/pcl.htm ) running on the same machine and want to integrate as a part of firmware build process.

Can anyone suggest the best way to do that?

Thanks,
Jay

over 8 years ago

0 Ki over 8 years ago

TI__Guru**** 473441 points

Hi Jay,
Are you looking to call PC-Lint as part of the project build process?

Thanks
ki

0 Jay Patel over 8 years ago in reply to Ki

Prodigy 110 points

Hi Ki,
Thanks for the reply.
Correct.
So, either as a part of pre-build steps or post-build steps (preferrable pre-build step)??

0 Ki over 8 years ago in reply to Jay Patel

TI__Guru**** 473441 points

Yes, unless you find a PC-Lint plug-in for Eclipse (which I could not find), the most common way to integrate such tools into the build is via pre/post build steps (depending on the action, you can both pre and post build steps)

Thanks
ki

0 Jay Patel over 8 years ago in reply to Ki

Prodigy 110 points

I could not find such a plug-in either.
Can you please provide some guidance about how can I add PC-Lint as pre-build step?

0 Ki over 8 years ago in reply to Jay Patel

TI__Guru**** 473441 points

I don't have much experience with PC-Lint so I can't provide much specifics. But the idea is that you can call some command-line executables for PC-Lint from your project pre/post build step to do whatever action you need for your build.

Code Composer Studio™︎

Code Composer Studio forum

CCS: PC-Lint with Code Composer Studio v6.2.0.00050