CCS/LAUNCHXL-F28069M: How to upload the program and run in release mode?

user4957458

Part Number: LAUNCHXL-F28069M

Tool/software: Code Composer Studio

Dear All

I do not found a way to upload the program and run in board with the Release Version. Can you help me with a Youtube video or a clue? May be some missing software.....

Thanks

Luis Gonçalves

Need fast answer

over 8 years ago

0 Ki over 8 years ago

TI__Guru**** 473001 points

Hello Luis,
I suggest taking a look at the fundamentals workshop for CCS. It is good way to learn the basics of CCS.
downloads.ti.com/.../sdto_ccsv7_c2000-fundamentals-workshop.html

Thanks
ki

0 user4957458 over 8 years ago in reply to Ki

Expert 1065 points

Sorry, but the workshop did not brought much more new.

The question is clear. How I upload the program in Release mode?

0 Ki over 8 years ago in reply to user4957458

TI__Guru**** 473001 points

What exactly is your question? Are you simply trying to load your program from the Release build configuration to your F28069 target?

0 user4957458 over 8 years ago in reply to Ki

Expert 1065 points

Yes

0 Ki over 8 years ago in reply to user4957458

TI__Guru**** 473001 points

There are two ways to do this.

The first is simply make sure the "Release" configuration is the ACTIVE configuration and then press the "Debug" button.

See the video below starting at around the 5:15 mark for an example of the "Debug" button

http://dev.ti.com/tirex/#/?link=Development%20Tools%2FIntegrated%20Development%20Environments%2FCode%20Composer%20Studio%2FGeneral%20and%20IDE%2FTraining%2FGetting%20Started%20with%20Code%20Composer%20Studio%20v7%20(YouTube)

The second option is to launch the debugger and load the code (Run -> Load -> Load Program) manually.

Thanks

0 user4957458 over 8 years ago in reply to Ki

Expert 1065 points

Thanks. I suppose that I answered my issue despite I did not tried yet

0 user4957458 over 8 years ago in reply to Ki

Expert 1065 points

e2e.ti.com/.../2319653

You can try to answer this also.

Code Composer Studio™︎

Code Composer Studio forum

CCS/LAUNCHXL-F28069M: How to upload the program and run in release mode?