CCS: GUI SCOPE

ADDAGUDURU SURYA KIRAN

Intellectual 770 points

Tool/software: Code Composer Studio

sir,

i want see p.w/m waveforms in the scope of the c.c.s that is i want G.U.I

over 8 years ago

0 desouza over 8 years ago

TI__Guru**** 171729 points

Hi,

Some references to set up graphs in CCS can be found at the following wikis:

processors.wiki.ti.com/.../Graph_Visualization_for_MSP430

processors.wiki.ti.com/.../GSG:Debugging_projects_v5

Also, CCS can update its screen at every 500ms (under very specific circumstances this value can be reduced to 100ms), therefore it is not "real time" and its blind time is very high when compared to an oscilloscope. The post below explains ways to improve this by gathering more data to be displayed at every update.

e2e.ti.com/.../186480

Hope this helps,
Rafael

Code Composer Studio™︎

Code Composer Studio forum

CCS: GUI SCOPE