• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 54 subscribers
  • Views 750 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS: Plot the Data taken with the capture demo

Christian Mougang
Prodigy 30 points

Other Parts Discussed in Thread: AWR1642

Tool/software: Code Composer Studio

Hallo e2e Community,

i am trying actually to take the data using the capture demo for AWR1642. So i have two questions:

1) Where to see the measured data while using the capture demo

2  How to plot the captured data after  with matlab.....i am a beginner with the demo so i will be very thankful to receive a very cleafuly response

  • 0
    TI__Guru**** 474831 points

    Hello,

    Christian Mougang said:
    1) Where to see the measured data while using the capture demo

    Can you provide a bit more details about this demo? Where did you obtain it? 

    Christian Mougang said:
    2  How to plot the captured data after  with matlab

    For questions regarding Matlab, it is best to contact Mathworks support directly. 

    Thanks

    ki

  • 0 in reply to Ki
    TI__Guru**** 474831 points
    Hello,
    I haven’t heard back from you, I’m assuming you were able to resolve your issue. If not, please provide post a reply with an update below (or create a new thread).

    thanks,
    ki