CCS: Which CCS to use for Development on the CC1350 Launchpad

Hello,

Raghu Devisetti23 said:

I am new to CC1350 and would like to know which CCS version to use for development on the CC1350 Launchpad, is it CCS Cloud IDE or offline CCS that will be downloaded to my PC and use?

You can use either one. CCS Cloud is fine to get started quickly, without the need of installing full CCS on your PC. But if you want to access the full power of CCS, you will eventually want to move to the desktop version

Raghu Devisetti23 said:

How can I start using the CCS IDE? Currently I tried the CC Cloud IDE but i am not able to see any Reference Examples for the target processor.

There are plenty of examples available with the SimpleLink SDK for CC13x0 in Resource Explorer. These examples can be used with CCS Cloud or Desktop:

http://dev.ti.com/tirex/#/?link=Software%2FSimpleLink%20CC13x0%20SDK

There is also a workshop for getting started with CCSv7 and the CC13x0 that I suggest taking a look at:

http://dev.ti.com/tirex/#/?link=Development%20Tools%2FIntegrated%20Development%20Environments%2FCode%20Composer%20Studio%2FGeneral%20and%20IDE%2FTraining%2FWorkshops%2FCC13x0%20Fundamentals%20Workshop%20for%20CCSv7

Thanks

ki

Thanks Ki, for the reply. Can I modify the CC1350 SPI Driver to interface the standalone ethernet module ENC28J60 to the LAUNCHXL-CC1350 launchpad and also to access an external SD Card?

You last question is best answered by the experts in the associated device forum. I suggest starting a new thread there:
e2e.ti.com/.../156

Thanks
ki

Thanks