• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 53 subscribers
  • Views 1346 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TMDSEMU110-U: Error -267

Charles Oladimeji
Mastermind 33805 points
Part Number: TMDSEMU110-U
Other Parts Discussed in Thread: ENERGYTRACE

Tool/software: Code Composer Studio

Hi,

I am trying to use the XDS110 JTAG Debug Probe for JTAG programing of a launchpad and i keep getting the error 

"IcePick_C_0: Error connecting to the target: (Error -267 @ 0x0) The controller could not detect valid target supply. Check target JTAG connection and/or connection setting specifying voltage level. (Emulation package 6.0.504.1)"

Can you please help explain the meaning of this error and how to resolve it?

Regards,

Charles O

  • 0
    TI__Guru**** 170154 points
    For others following this thread, this is being resolved offline.

    At this point we believe it is a HW connection issue between the cTI 20-pin connector of the XDS110 and the ARM 10-pin connector of the CC3220 launchpad board.

    Regards,
    Rafael
  • 0 in reply to desouza
    TI__Guru**** 170154 points
    Subsequent tests revealed the target was successfully connected but the EnergyTrace results were rather inconsistent.

    The culprit is the base XDS110 pod, which was an internal old revision HW that was not properly working with EnergyTrace.

    Replacing the XDS110 with the production model solved the issue.