CCS/CCSTUDIO-MSP: Can't See Tools menu

Keith Barkley

Guru 42085 points

Part Number: CCSTUDIO-MSP

Tool/software: Code Composer Studio

I am trying to run the uart-logging TIRTOS example for the red MSP432 board.

The readme says that I should go into the CCS Tools menu and select RTOS Analyzer->Execution Analysis. I don't have a tools menu in my CCS install.

Do I need to install something else?

over 7 years ago

0 JohnS over 7 years ago

TI__Guru**** 162255 points

Keith,

The Tools menu is only present in the CCS Debug Perspective. It is not present in the CCS Edit or Simple Perspectives.

Are you in the CCS Debug perspective? This one opens by default when you launch the debugger.

Regards,
John

0 Keith Barkley over 7 years ago in reply to JohnS

Guru 42085 points

I saw no difference in the menus between debug and non-debug. However, I was in "simple" mode. I will try toggling out of that and trying again.

0 Keith Barkley over 7 years ago in reply to JohnS

Guru 42085 points

Thanks, that did it. No more simple view for me!

0 JohnS over 7 years ago in reply to Keith Barkley

TI__Guru**** 162255 points

Great. The simple view is easy to navigate but it does hide a lot of features.

John

Code Composer Studio™︎

Code Composer Studio forum

CCS/CCSTUDIO-MSP: Can't See Tools menu