CCS/TIMAC: Porting TIMAC (IEEE 802.15.4) project from IAR to CCS

Sruthi ks

Part Number: TIMAC
Other Parts Discussed in Thread: CC2650,

Tool/software: Code Composer Studio

Hi,

I have downloaded the simplelink timac_1_05_02_43299 files for the CC2650.

I have seen that, the TIMAC sample code is only available in IAR workbench. Can you please prefer a proper method to port this example to CCS.

Best Regards,

Sruthi

over 7 years ago

0 Brocklobsta over 7 years ago

TI__Expert 4375 points

Hey Sruthi,

TIMAC 1.5.2 does not support the CCS IDE. The software has not been verified using the CCS code generation tools. The newer TI 15.4-Stack (IEEE 802.15.4g based stack) does support CCS.

0 Sruthi ks over 7 years ago in reply to Brocklobsta

Prodigy 20 points

Hi,

I don't have much more idea about IAR workbench, so I am a quite curious about why it is not possible.

If you don't mind can you please share the details

Best Regards,

Sruthi KS

0 Brocklobsta over 7 years ago in reply to Sruthi ks

TI__Expert 4375 points

Hey Sruthi KS,

Let me see what I can find. I will post details on this soon.

Code Composer Studio™︎

Code Composer Studio forum

CCS/TIMAC: Porting TIMAC (IEEE 802.15.4) project from IAR to CCS