• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 53 subscribers
  • Views 1049 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TDC1000-TDC7200EVM: [TDC1000-TDC7200][CCS][MSP430] output file load error

Rohan Kumar
Prodigy 60 points

Part Number: TDC1000-TDC7200EVM
Other Parts Discussed in Thread: MSP430F5528

Tool/software: Code Composer Studio

I am trying to run a example code from resource explorer of MSP430F5528. I am using TDC1000-TDC7200 board. Error shows that output file cannot be loaded. I am using UART protocol to connect device with my laptop and am using latest version of CCS. I tried to change the path of workspace to check if it is permission issue but that didn't work.

How to fix this?

I'm using windows 10 and am not using debug probe.

  • 0
    TI__Guru**** 484881 points
    Hi Rohan,
    I see you have posted the same question multiple times. The reply is the same as I gave in your other thread:
    e2e.ti.com/.../648947

    I see that you modified your other thread and removed much information. It is easier to stick to one thread so please avoid duplicate posts. As mentioned in the other thread, check the user's guide and make sure you have done the necessary steps to setup your device. If you are still stuck, I suggest posting a follow up question in the MSP forum. The experts there can help you best

    Thanks
    ki