CCS/MSP430G2553: MSP430G2553

Avraham Efraimov

Other Parts Discussed in Thread: MSP430G2553

Tool/software: Code Composer Studio

I'm using msp430g2553 launchpad with code composer stodio v7.2.

I wrote a program which samples voltage from 3 diffrenet ADC channels and some other digital functions.

In my project i bulit my own CLI in (using echo isr) order to update and display my program variables.

Everything work fine untill recently, when i added a few more functions to improve performance, i have encountered the following error massege:

I have added the screen shot.

If necesary i will add the map file as well.

AVI

0 Ki over 7 years ago

Hello,
You have two common linker errors. The first is described in detail in the below link:
processors.wiki.ti.com/.../10234

The second is described in detail in the below link:
processors.wiki.ti.com/.../10099

The second error may require you to modify your linker command file. If youa re not familiar with how to do this, please see this excellent primer in the link below:
processors.wiki.ti.com/.../Linker_Command_File_Primer

Thanks
ki

0 Avraham Efraimov over 7 years ago in reply to Ki

Hi Ki

Thank you for your replay.
I will check it out as soon as i can and i will update you.

Avi

Code Composer Studio forum