CCS/AWR1642: How to specify boot.asm

Kensuke

Expert 1140 points

Part Number: AWR1642
Other Parts Discussed in Thread: SYSBIOS

Tool/software: Code Composer Studio

I created very simple CCS project for AWR1642.

It linked C:\ti\ti-cgt-arm_16.9.1.LTS\lib\src\boot.asm.

But the demo project of mmwave_sdk linked C:\ti\bios_6_52_00_12\packages\ti\targets\arm\rtsarm\boot.asm.

Where do I specify Boot.asm in CCS?

over 8 years ago

0 Kensuke over 8 years ago

Expert 1140 points

I attached simple project.

8611.Test.zip

0 desouza over 8 years ago in reply to Kensuke

TI__Guru**** 171729 points

Hi,

>>Where do I specify Boot.asm in CCS?
The Boot.asm will be determined by the type of approach you are using. If you are creating a project that uses our real-time kernel SYSBIOS, the Boot.asm will be picked from its own location. Otherwise, if you are using the TI Compiler tools you will have it picked from it.

Regards,
Rafael

0 Kensuke over 8 years ago in reply to desouza

Expert 1140 points

Hi,

Thank you for your prompt answer.
I understood.

Thanks,

0 Kensuke over 8 years ago in reply to Kensuke

Expert 1140 points

Hi,

It looks like C: \ ti\ti-cgt-arm_16.9.1. LTS\lib\src\boot.asm is linked, but how do I build it?

Thanks

0 Kensuke over 8 years ago in reply to Kensuke

Expert 1140 points

Hi,

I could build boot.asm by including boot.asm in to the CCS project.

Thanks

Code Composer Studio™︎

Code Composer Studio forum

CCS/AWR1642: How to specify boot.asm