CCS/AM5728: Ti Debugger on MAC High Sierra

Michel Catudal

Part Number: AM5728
Other Parts Discussed in Thread: DRA726

Tool/software: Code Composer Studio

Can I use the MAC CCS to debug Cortex M4 and DSP code for the Beagleboard X15 on MAC High Sierra (27 inch 5K latest version)?

Michel Catudal

over 7 years ago

0 Ki over 7 years ago

TI__Guru**** 472261 points

Hello,
See the below link for a list of supported devices on MAC
processors.wiki.ti.com/.../MacOS_Host_Support_CCSv8

In short, while some cortex M4 devices are supported, the AM5728 as a whole is not.

Thanks
ki

0 Michel Catudal over 7 years ago in reply to Ki

Genius 3825 points

ki,

I read that and didn't see Cortex M4 or DSP, which is why I asked. I use my ryzen 7 Linux computer for the Linux stuff but was wondering if I could use my MAC to debug the M4 and DSP, the graphic on my MAC is much nicer than anything on Linux.

Any support planned for the AM5728 or DRA726?

Michel

0 Ki over 7 years ago in reply to Michel Catudal

TI__Guru**** 472261 points

There is nothing planned at the moment, but of course that can change depending on demand. But right now, CCS MAC is mostly for development on our MCU families. Sorry

ki

Code Composer Studio™︎

Code Composer Studio forum

CCS/AM5728: Ti Debugger on MAC High Sierra