Part Number: AM5708
Tool/software: Code Composer Studio
On my custom AM5708 board, I have two target configurations. One works and the other one doesn't.
The error I get from one configuration is this :
According to JTAG debug wiki [1], this could be hardware issue. Hence I am compelled to get to the bottom of this even though my 2nd configuration seems to work ok.
As the message suggest, I slowed down the JTAG speed as well. It doesn't help.
Can someone think of what may have resulted in this error? I can't tell the difference between my two configurations.
[1] http://processors.wiki.ti.com/index.php/Debugging_JTAG_Connectivity_Problems#Cannot_access_the_DAP
