CCS: CCSv5 Tools does NOT show the "Profile" option

William Trudell

Tool/software: Code Composer Studio

I am using Code Composer Studio Version 5.5.0.00077, the help tells me that Profiling Code Execution is available in Tools, but it is not shown. The Installation Details show "Profile" type plugins are there.

over 7 years ago

0 Ki over 7 years ago

TI__Guru**** 478711 points

Hi Bill,
What device are you working with? And are you working with HW or simulation?

Thanks
ki

0 William Trudell over 7 years ago in reply to Ki

Prodigy 60 points

I'm working with TI hardware. I found it located in a place I wasn't looking. However, even though the Simulink Model has function tracing and profiling, the TI tools do not show any of that information.

0 Ki over 7 years ago in reply to William Trudell

TI__Guru**** 478711 points

What exact device are you working with? Note that CCS function profiling is not supported on all devices.

0 Ki over 7 years ago in reply to Ki

TI__Guru**** 478711 points

Hello,
I haven’t heard back from you, I’m assuming you were able to resolve your issue. If not, please post a reply with an update below (or create a new thread).

thanks,
ki

Code Composer Studio™︎

Code Composer Studio forum

CCS: CCSv5 Tools does NOT show the "Profile" option