• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 54 subscribers
  • Views 508 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/RM46L852: Multiple Segger J-Links debugging at the same time

Kubiks
Prodigy 120 points

Part Number: RM46L852

Tool/software: Code Composer Studio

Hello!

I would like to use 2 J-Links to debug my board at the same time. Is this possible?

Greetings,

Kubiks

  • 0
    TI__Guru**** 171639 points
    Kubiks,

    Not directly from inside CCS, given that Segger does not have any settings that uniquely identify each connected probe.

    You can also post this question to Segger support at support_jlink@segger.com, as they may have a way to perform this through their own software.

    Hope this helps,
    Rafael