CCS: error #10056

Zheng De Rong

Other Parts Discussed in Thread: CC3200

Tool/software: Code Composer Studio

Hi: Please help to check what is issue when i compiler the code.

error #10056: symbol "vApplicationStackOverflowHook" redefined: first defined in "./main.obj"; redefined in "./main_Org.obj"
error #10056: symbol "vApplicationIdleHook" redefined: first defined in "./main.obj"; redefined in "./main_Org.obj"
error #10056: symbol "main" redefined: first defined in "./main.obj"; redefined in "./main_Org.obj"
error #10056: symbol "vApplicationMallocFailedHook" redefined: first defined in "./main.obj"; redefined in "./main_Org.obj"
error #10056: symbol "vAssertCalled" redefined: first defined in "./main.obj"; redefined in "./main_Org.obj"

undefined first referenced
symbol in file
--------- ----------------
GPIO_IF_Get ./cc3200_ds18b20.obj
GPIO_IF_GetPortNPin ./cc3200_ds18b20.obj
GPIO_IF_Set ./cc3200_ds18b20.obj

error #10234-D: unresolved symbols remain
error #10010: errors encountered during linking; "freertos_demo.out" not built

>> Compilation failure
makefile:147: recipe for target 'freertos_demo.out' failed
gmake: *** [freertos_demo.out] Error 1

over 7 years ago

0 Seong Kim over 7 years ago

TI__Mastermind 47216 points

Hey Zheng,

Please see this related post: e2e.ti.com/.../786455

BR,
Seong

0 Zheng De Rong over 7 years ago in reply to Seong Kim

Prodigy 80 points

I have checked my coding and did't using 'x' , I think should be below of error. Any idea?

error #10056: symbol "vApplicationStackOverflowHook" redefined: first defined in "./main.obj"; redefined in "./main_Org.obj"
error #10056: symbol "vApplicationIdleHook" redefined: first defined in "./main.obj"; redefined in "./main_Org.obj"
error #10056: symbol "main" redefined: first defined in "./main.obj"; redefined in "./main_Org.obj"
error #10056: symbol "vApplicationMallocFailedHook" redefined: first defined in "./main.obj"; redefined in "./main_Org.obj"
error #10056: symbol "vAssertCalled" redefined: first defined in "./main.obj"; redefined in "./main_Org.obj"

0 Seong Kim over 7 years ago in reply to Zheng De Rong

TI__Mastermind 47216 points

Zheng,

Yes, of course. The thread that I linked covers the same type of error but with the symbol 'x'. In your case, it is with the "vApplicationStackOverflowHook", "vApplicationIdleHook", "main", etc.

The rest of the thread's discussion covers the root cause of this type of error; how 'x' was defined in a header included in two different .c files.

Ensure that your header files included in your main.c and main_Org.c, have only declarations and not definitions.

Hope this helps,

Seong

0 Zheng De Rong over 7 years ago in reply to Seong Kim

Prodigy 80 points

Hi:

After i made some changed on the code, Below are error.

error #10234-D: unresolved symbols remain
error #10010: errors encountered during linking; "freertos_demo.out" not built

>> Compilation failure
makefile:149: recipe for target 'freertos_demo.out' failed
gmake: *** [freertos_demo.out] Error 1

0 Seong Kim over 7 years ago in reply to Zheng De Rong

TI__Mastermind 47216 points

Hey Zheng,

Did the error #10056 go away at least?

If error #10234-D and error #10010 are the only remaining errors..the error message, along with suggestions on how to fix it, is detailed in the below article:

processors.wiki.ti.com/.../Build_Errors_in_CCS

BR,
Seong

0 Seong Kim over 7 years ago

TI__Mastermind 47216 points

Hey Zheng,

Were you able to fix this issue?

BR,
Seong

Code Composer Studio™︎

Code Composer Studio forum

CCS: error #10056