CCS/CC2640R2F: Release Mode

MY MY

Part Number: CC2640R2F

Tool/software: Code Composer Studio

hey,

I use cc2640r2f and i run it with "debug" mode,

Now, i want to run it with mode "release"

how i can do it.

Cheers

over 7 years ago

0 Ki over 7 years ago

TI__Guru**** 479381 points

Hello,
You can change the project's active configuration to "Release" (assuming such a configuration exists). Once the active configuration is properly set, you can use the same button to debug the project.

software-dl.ti.com/.../ccs_project-management.html

Thanks
ki

0 MY MY over 7 years ago in reply to Ki

Expert 1055 points

Hey,

I search in debug mode, but i don't find the release mode

Thanks you

0 MY MY over 7 years ago in reply to MY MY

Expert 1055 points

i found it,

It is in propriety --> products

Thank you

0 Ki over 7 years ago in reply to MY MY

TI__Guru**** 479381 points

You can change the build configuration from the drop-down below:

If there is no "Release" option, then one doesn't exist for your project (you can always create one yourself)

Thanks

0 MY MY over 7 years ago in reply to Ki

Expert 1055 points

Hey,

In some project there is no this option ; for example simple central , peripheral, broadcaster......but i found it when i clic proprieties and clic in products.....

Thanks

Code Composer Studio™︎

Code Composer Studio forum

CCS/CC2640R2F: Release Mode