CCS/TMS320C6678: how to change the cmd file?

user5334191

Part Number: TMS320C6678
Other Parts Discussed in Thread: SYSBIOS

Tool/software: Code Composer Studio

Under the sysbios system, I want to change the MEMORY part of the cmd file. My modification method is to select the project and click project->RTSC Tools->platform->Edit/View to select the corresponding bios version. The result is no corresponding package Name, so I created a new platform to modify the MEMORY inside, the result cmd file has not changed, MEMORY has not changed.

over 7 years ago

0 ToddMullanix over 7 years ago

TI__Guru* 96960 points

Hi,

First, which version of SYS/BIOS and XDCtools are you using?

Can you attach the linker file that was generated? Which MEMORY area are you referring to?

When you say "click project->RTSC Tools->platform->Edit/View to select the corresponding bios version", I'm not sure what you mean. Can you attach a snapshot?

Todd

0 user5334191 over 7 years ago in reply to ToddMullanix

Prodigy 160 points

The version of SYS/BIOS is 6.33.6.50. The version of XDCtools is 3.23.4.60. I mean MEMORY refers to the MEMORY area in the cmd file generated by the system. I want to change the length of shared memory. And I changed it on the platform, but the contents of the cmd file have not changed.

Linker file：

Screenshot of the platform I edited：

0 Sean Oliver28 over 7 years ago in reply to user5334191

TI__Intellectual 1060 points

Hi!

Sorry for the delay in response. Have you seen this step by step guide for adding new platforms?

rtsc.eclipse.org/.../Demo_of_the_RTSC_Platform_Wizard_in_CCSv4

Thanks for your patience.

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMS320C6678: how to change the cmd file?