CCS/LAUNCHXL-CC2640R2: Not able to open com port in CCS cloud

vinayak kulkarni

Tool/software: Code Composer Studio

Hi,

I have installed TICloud agent bridge and application in ubuntu 16.04 (64-bit) and also linked libudev.so.0 to libudev.so.1

But when I unable to open COM port from CCS cloud. It gives me following error. Please let me know the solution.

Thanks

over 7 years ago

0 Ki over 7 years ago

TI__Guru**** 479161 points

Hello,
When does this error occur? Are you explicitly doing "Target -> Connect COM port"?

Thanks
ki

0 vinayak kulkarni over 7 years ago in reply to Ki

Prodigy 190 points

yes. I do it explicitly. Should I need to take care prior to that?

Thanks

Vinayak

0 Ki over 7 years ago in reply to vinayak kulkarni

TI__Guru**** 479161 points

Are you able to load code and debug before you try to connect to the COM port?

0 vinayak kulkarni over 7 years ago in reply to Ki

Prodigy 190 points

Hi,

Yes I am able to load the code but not able to debug. Gives me following error.

0 Ki over 7 years ago in reply to vinayak kulkarni

TI__Guru**** 479161 points

How did you import this project into your Cloud workspace? Did you import it from Cloud Resource Explorer? Or from a project from your local machine?

0 vinayak kulkarni over 7 years ago in reply to Ki

Prodigy 190 points

Hi, I imported using Cloud Resource Explorer.

0 Ki over 7 years ago in reply to vinayak kulkarni

TI__Guru**** 479161 points

Are you using the latest SDK version (2.20)? In your screenshot, it looks like only the application project was imported, and not the dependent TI-RTOS project. Both projects should get imported when you import the empty project from Cloud Resource Explorer, as shown below:

Can you remove all project from your workspace and import the empty project again?

Thanks

0 Ki over 7 years ago in reply to Ki

TI__Guru**** 479161 points

Hello,
I haven’t heard back from you, hence this issue is being closed. If you wish to continue the discussion, please post a reply with an update below (or create a new thread).

Thanks,
ki

0 vinayak kulkarni over 7 years ago in reply to Ki

Prodigy 190 points

This solved my issue after adding both project.

Code Composer Studio™︎

Code Composer Studio forum

CCS/LAUNCHXL-CC2640R2: Not able to open com port in CCS cloud