CCS/MSP430F47187: Trace feature on MSP430

Hi Anand,

there is a feature in CCS called Cycle Counter which counts your clocks.

Please check chapter 7 of application note  SLAA393. Although this app note talks about CCS6 I just tried it with CCS8 and it works. 

During an active debug session you go to "Run" --> "Clock" --> "Enable". Then you will get a small clock symbol at the lower part of the screen.

Best regards,

Andre

Hi,

do you have further questions regarding this topic? If not, please select "Resolved" for the post that solved your issue so this thread can be closed out. If you have a different question please select "Ask a related question" or " Ask a new question".
Thanks a lot!

Best regards,
Andre

Hi Andre, 

I am using CCS 6.0.1 and apparently it may not have this feature... because I could not find the option mentioned under Run.

Thanks for your help.