• State Resolved
  • Locked Locked
  • Replies 6 replies
  • Subscribers 54 subscribers
  • Views 718 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS: CCS installation

user1818430
Prodigy 190 points

Tool/software: Code Composer Studio

hello，

I want  to install CCS8.2 /8.1, but it always stops at :

Running post install steps
Registering new target content products

screenshot as :

it takes housand doesn't move  at all

iis it normal ?and anything I can do ?

best regards !!

  • 0
    Guru 26200 points
    Hello,

    I cannot understand your issue.

    What is your OS?
    Do you have 8.1 already installed?
    Does it fail during 8.1 or 8.2 installation?
    Do you run upgrade or do you try to have 8.1 and 8.2 in parallel?
    Please, search e2e for 8.2 installation issues.
  • 0 in reply to Tomasz Kocon
    Prodigy 190 points
    hello
    thank you for your reply!

    My OS is win10;
    I have quit installing CCS8.1
    I met the same problem when I tried to install CCS 8.2
    it always stopped at the same spot:

    Running post install steps
    Registering new target content products

    please tell me how to solve it
  • 0 in reply to user1818430
    Guru 26200 points
    Install using offline installer with an admin privilege.
    Before you start installation disconnect your network interfaces.
    Install 8.1 in c:\ti\ccs810 and 8.2 in c:\ti\ccs820 or something like this.
    Always use separate workspaces for the different CCS versions.
  • 0 in reply to user1818430
    TI__Mastermind 22060 points

    Please zip up and post the contents of your install_logs folder in the installation directory.

    Thanks,

    Danish

  • 0 in reply to danishinnis
    Prodigy 190 points

    hello

    thanks!!

    here is the log zip filehttps://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/81/2816.install_5F00_logs.7z, I quit  installing , and  CCS launches without big problem , and I haven't tried other functions

    thanks again!!

    best regards

  • 0 in reply to user1818430
    TI__Guru**** 173310 points

    user1818430 said:
    here is the log zip file(Please visit the site to view this file), I quit  installing , and  CCS launches without big problem , and I haven't tried other functions

    The log file does not tell us why the installation was stuck. However, since that step is almost at the end of the install, only some cleanups etc. are run at the time, so the installation itself should be fine. It sounds like you have been able to launch and use CCS, so we will close out this thread. Feel free to open a new thread if you encounter issues in the future.