CCS/CC2640R2F: project zero appl

What do you get?

OK, there were so many problems I couldn't list them all. Paths not correct, couldn't keep projects viewable, etc, etc. I would need interactive phone support to work through and get this set up right.

I have an alternate plan - got vectored onto a different project - 2650 sensortag. So I'm going to just restart from scratch and try to get it right this time. If I fail then I will write about it :).

Thanks,
Belvin

Follow your manual.

As a matter of fact, I agree with that!  But that raises a question:  there are so many links to TI manuals I find it hard to choose the right one.  So, could you please specify the link you had in mind that would show the procedure to bring project zero to life?  Note:  the information I'm seeking is not about {ble protocol, software algorithms}.  What I'd like is to find, in one document, a step-by-step procedure to launch CCS and build this project.  I have been doing this a long time and know how to develop real-time code.  My problem is that CCS seems to behave differently from every other IDE I've ever seen, and the ways to control this behavior do not (imo) reside in the expected places.

Thanks!

Belvin