CCS / TMS570LS0714： EB Tool configuration DIO module

user5896626

Tool/software: Code Composer Studio

I have a problem configuring DIO in EB

Ex. :

LINRX and LINTX are configured in LINPORT, but there is only one DioPortLin in EB, but the corresponding relationship between them is unknown. DioChannelID is not sure how to fill in.

over 7 years ago

0 Miro over 7 years ago

TI__Mastermind 21425 points

Hello,
Could you describe a little bit more about your setup. Which EB are you using? What I understand is that you want to use LIN module (LIN mode or SCI mode?). TMS570LS0714 has two SCI interfaces but only one of them is with LIN.

Best regards,
MIro

0 user5896626 over 7 years ago in reply to Miro

Intellectual 470 points

Hi,Miro

the tool I used is EB tresos 21.0.0. Now I want to configure DIO.

EB configuration has a configuration option (DioPortLin). We now use this PIN as GPI, but the corresponding DioChannelID does not know how to fill in.

Shuai

0 QJ Wang over 7 years ago in reply to user5896626

TI__Guru**** 200206 points

Shuai,

You can define the value for DioChannleID for DioChannel _0 and DioChannel_1. It should be a number between 0 and 110.

Code Composer Studio™︎

Code Composer Studio forum

CCS / TMS570LS0714： EB Tool configuration DIO module