CCS/DS90UB964-Q1EVM: ALP cannot configure 964 ,CCS debug error initalizing emulator:No USB FET was found

Hanyia Chia

Part Number: DS90UB964-Q1EVM
Other Parts Discussed in Thread: ALP

Tool/software: Code Composer Studio

ALP cannot recognize DS90UB964EVM (unknown device connect with DS90UB913)connecting the device with computer in USB cable.Then debugging programmer to the msp430 by the USB cable is not successful.No USB FET was found.

I wonder whether the USB cable can download program.Or whether I need do any configurations with the CCS?

over 5 years ago

0 Vishy Viswanathan over 5 years ago

TI__Mastermind 21685 points

Hello,

It could be that the MSP430 firmware didn't get loaded or got corrupted. As a debug step, you can do the steps explained in the link below and update the MSP430 firmware version to 2.7.

e2e.ti.com/.../2688720

Then connect with ALP again and try. Let me know if you have questions on the procedure.

Thanks,
Vishy

Code Composer Studio™︎

Code Composer Studio forum

CCS/DS90UB964-Q1EVM: ALP cannot configure 964 ,CCS debug error initalizing emulator:No USB FET was found