CCS/TDA3: How do I collect the API which was called of RadarSDK?

Kensuke

Expert 1140 points

Part Number: TDA3

Tool/software: Code Composer Studio

Hi,

The RadarSDK contains many functions, but I want to know which function was called.

Is there a way to create the API list that was called?

Thanks,

over 7 years ago

0 Ki over 7 years ago

TI__Guru**** 484961 points

Hello,
One option is to generate a static call graph using the CG XML tool:
software-dl.ti.com/.../sdto_cgt_cg_xml_overview.html

There all also a variety of 3rd party tools that provide similar functionality.

Thanks
ki

0 Kensuke over 7 years ago in reply to Ki

Expert 1140 points

Hi Ki,

Thank you for your advice.
I understood the CG XML tool can generate call graph, but the call tree will break when function is called by pointer.

Are there trace feature in the RadarSDK?

Thanks,

0 Ki over 7 years ago in reply to Kensuke

TI__Guru**** 484961 points

You are using the TDA3, correct? There should be support for processor trace on that device:
processors.wiki.ti.com/.../CCS_Modules_Library

0 Kensuke over 7 years ago in reply to Ki

Expert 1140 points

Correct, I am using TDA3.
Can I use Real-time Trace for Keystone Devices?

0 Ki over 7 years ago in reply to Kensuke

TI__Guru**** 484961 points

Yes. While your device is not technically a "Keystone" device, you should have support for processor trace on both the DSP and A15. Note that there are several HW dependencies so please check the presentation.

Code Composer Studio™︎

Code Composer Studio forum

CCS/TDA3: How do I collect the API which was called of RadarSDK?