CCS/IWR1642BOOST: I am not getting any projects in import ccs Eclipse Project

Arpit Patel

Expert 2040 points

Tool/software: Code Composer Studio

While importing ccs project from mmwave_sdk 3 I am not getting any project. I have downloaded mmwave sdk 3 times though same problem has been occured. Even while doing refresh no change has occured.

over 7 years ago

0 Tomasz Kocon over 7 years ago

Guru 26200 points

Arpit Patel said:
While importing ccs project from mmwave_sdk 3 I am not getting any project.

There are no projects to download from mmwave_sdk_03_00_00_08 installation folder.

0 Arpit Patel over 7 years ago in reply to Tomasz Kocon

Expert 2040 points

I am saying about importing not downloading. What about those which are coming on resource explorer in mmwave sensors as shown in fig. below. Even second time when I installed at first these were coming.

0 Tomasz Kocon over 7 years ago in reply to Arpit Patel

Guru 26200 points

Arpit Patel said:
I am saying about importing not downloading

I am sorry for improper wording.
My answer should be: There are no projects to download import from mmwave_sdk_03_00_00_08 installation folder.

Arpit Patel said:
What about those which are coming on resource explorer in mmwave sensors

Both Automotive and Industrila mmwave sensors are separate products and they contain projects which can be imported.

0 Arpit Patel over 7 years ago in reply to Tomasz Kocon

Expert 2040 points

Then why I am not seeing anything in that as I have mentioned in my question ans as per screen shot? Even on cloud I am getting as shown in fig. below. I am sending you both the screen shot.

0 Tomasz Kocon over 7 years ago in reply to Arpit Patel

Guru 26200 points

Arpit Patel said:
Then why I am not seeing anything in that as I have mentioned in my question ans as per screen shot?

The service could be temporarily down. Try again.

Arpit Patel said:
I am sending you both the screen shot.

I already addressed the second screen.
By the way, if Resource Explorer does not start, try again, again and again.
If you have 8 GB of RAm or less, Resource Explorer usually would not start at first try.

0 desouza over 7 years ago in reply to Tomasz Kocon

TI__Guru**** 171819 points

Hi,

Tom is correct; the mmwave SDK does not seem to have any CCS projects to import. Please check section 4.5 of the mmwave SDK User Guide for details on how to build the demos and projects.

Hope this helps,
Rafael

0 Arpit Patel over 7 years ago in reply to desouza

Expert 2040 points

Ok. Now I have imported that from resource explorer. Will it work the same as it used to?

0 Arpit Patel over 7 years ago in reply to desouza

Expert 2040 points

But what about those which are coming in resource explorer DSS & MSS. Can't we import even this demo program? Because when I installed mmwave sdk second time I have import traffic monitoring demo code but after this I no demo code have been seen at time when you import it from import ccs project.

0 Tomasz Kocon over 7 years ago in reply to Arpit Patel

Guru 26200 points

Just try.

0 Tomasz Kocon over 7 years ago in reply to Arpit Patel

Guru 26200 points

Please, show me your Project Explorer window.

0 Tomasz Kocon over 7 years ago in reply to Tomasz Kocon

Guru 26200 points

Hello,
have you fixed the issue?

Code Composer Studio™︎

Code Composer Studio forum

CCS/IWR1642BOOST: I am not getting any projects in import ccs Eclipse Project