• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 54 subscribers
  • Views 285 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/AWR1642BOOST: In SRR demo, the range profile data is not sent out?

Kathy Lee60
Intellectual 515 points

Part Number: AWR1642BOOST

Tool/software: Code Composer Studio

Hello ,

my question is: in the SRR demo of AWR1642demo, the UART sent out data is TrackOpFinal which doesn't include range profile data? Could someone please tell me, because I'm not sure.

Many thanks,

Kathy

  • 0
    TI__Guru 70830 points
    Hi,
    I don't get which specific parameter you want to send over UART.
    But to add/remove any parameter you can refer 'SRR_DSS_SendProcessOutputToMSS' function of dss_main.c where DSS adds up and form the message to send to MSS and further over UART to PC.


    Regards,
    Jitendra