• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 54 subscribers
  • Views 304 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TMS320F28377S: Graphic Debug

Jero
Prodigy 250 points

Part Number: TMS320F28377S

Tool/software: Code Composer Studio

Hi,

I have a board based on DSP TMS320F28377S shared with other co-workers. I need to know if I am able to debug also in Code Composer  without the board and if are there some tools to debug visualizing PWM outputs wave forms and/or registers contents and/or SCI McBSP data

Thanks a lot in advance,

F.

  • 0
    TI__Guru**** 475451 points

    Hello,

    user3517898 said:
    I need to know if I am able to debug also in Code Composer  without the board

    Not with current versions of CCS. The last version of CCS to have support for instruction set simulators is CCSv5. And even then, it was only a core simulator for F283x. 

    user3517898 said:
    if are there some tools to debug visualizing PWM outputs wave forms and/or registers contents and/or SCI McBSP data

    We do have some graph visualization tools. Whether they are sufficient for your needs, I am not sure since I am not familiar with those peripherals you mentioned. You may want to start a separate thread in the C2000 forum.

    Thanks

    ki