CCS/CC3200: UNIFLASH Install

Bob Shankle

Part Number: CC3200
Other Parts Discussed in Thread: UNIFLASH,

Tool/software: Code Composer Studio

Hi Folks,

We are trying to install only Uniflash on a remote machine (at client's site) for updating CC3200 modules. During the install we are getting the attached error. Note this is a machine with no other TI related software running such as Code Composer.

Any suggestions to get just Uniflash installed?

thanks,

Bob

over 6 years ago

0 Ki over 6 years ago

TI__Guru**** 471971 points

Hi Bob,
Can you provide that log file mentioned in the message above?

Thanks
ki

0 Bob Shankle over 6 years ago in reply to Ki

Expert 1180 points

My client is on travel for a few days (he has the logfile on his machine) so it might be a couple days.

thanks,
Bob

0 Bob Shankle over 6 years ago in reply to Bob Shankle

Expert 1180 points

My client was able to get Uniflash installed and running. (I'm not sure what he did other than just reinstall/reboot and click his heels together....)

thanks for standing by.

Bob

Code Composer Studio™︎

Code Composer Studio forum

CCS/CC3200: UNIFLASH Install