CCS/LAUNCHXL-CC2640R2: Need Sample codes for GPIO,BLE,Analog Pins

amar axr

Part Number: LAUNCHXL-CC2640R2
Other Parts Discussed in Thread: CC2640R2F

Tool/software: Code Composer Studio

Just purchased CC2640r2f board now have downloaded CCS, uploaded sample program, i need more sample program or support to start with it, please help, i am new to TI boards, i have used Arduino and PIC MCUs.

over 7 years ago

0 Markel Robregado over 7 years ago

Guru 86865 points

Hi Amar,

Download the latest CC2640R2 SDK, there you can find the codes for GPIO, BLE, Analog. Also it would help if you go through the SimpleLink Academy Modules for BLE.

-kel

0 amar axr over 7 years ago in reply to Markel Robregado

Prodigy 30 points

can you send screenshot of it, i cant able to find code.

0 amar axr over 7 years ago in reply to amar axr

Prodigy 30 points

Can you send basic BLE program to turn on & off Relay using CC2640R2F launchpad?

0 Markel Robregado over 7 years ago in reply to amar axr

Guru 86865 points

Hi Amar,

Download CC2640R2F SDK from the link below. For you to be able to turn on and off relay board you just need to turn on and off IO of CC2640R2F launchpad. You can learn how to do that at one of the driver examples from the SDK.

www.ti.com/.../SIMPLELINK-CC2640R2-SDK

You can also learn from Simplelink Academy.

training.ti.com/simplelink-academy

-kel

0 Ki over 7 years ago in reply to Markel Robregado

TI__Guru**** 483431 points

Markel Robregado said:
Download CC2640R2F SDK from the link below.

In addition to that link, you can also get the SDK from Resource Explorer:

http://software-dl.ti.com/ccs/esd/documents/users_guide/ccs_getting-started.html#resource-explorer

Thanks

Code Composer Studio™︎

Code Composer Studio forum

CCS/LAUNCHXL-CC2640R2: Need Sample codes for GPIO,BLE,Analog Pins