CCS/RF430FRL152HEVM: RF430FRL152

Syed Muhammad Ali

Part Number: RF430FRL152HEVM
Other Parts Discussed in Thread: RF430FRL152H

Tool/software: Code Composer Studio

Hello!

Currently I downloaded the code for RF430FRL152HEVM from the 3 examples provided by TI (Default Projects, NFC Projects, Sensor Hub Project) but there is a problem that in all the example codes have linking problem. Please help me to resolve this issue. Please note I have added all the header files while doing debugging.

kind regards,

Ali

over 6 years ago

0 AartiG over 6 years ago

TI__Guru**** 173310 points

It appears that you are building your own custom project, because I see your project name is test_1_RF430FRL152HEVM, which is not one the the example projects. Is that correct? If so, what exactly did you modify/add to the example code?

The general explanation for the "unresolved symbols remain" linker error is described here:
http://software-dl.ti.com/ccs/esd/documents/sdto_ccs_build-errors.html#error-unresolved-symbols-remain

Depending on how you created your custom project, make sure that the build settings for your project, especially linker options, match up with the example projects.

If you continue to have problems, please post the full build output seen in the CCS build console.

0 Syed Muhammad Ali over 6 years ago in reply to AartiG

Intellectual 300 points

Hello!
I just gave the name of the project as test_1 RF430FRL152HEVM.

I didn't change any part of the code.

0 AartiG over 6 years ago in reply to Syed Muhammad Ali

TI__Guru**** 173310 points

If you import the example project as-is and build (without changing the name) does it build without error?
If it does, then you can compare the build output of the example project with your project to see what is different.
If the example itself does not build, try importing into a new workspace. If the build errors persist, please post the full build log as I requested before.

0 Syed Muhammad Ali over 6 years ago in reply to AartiG

Intellectual 300 points

0 Syed Muhammad Ali over 6 years ago in reply to Syed Muhammad Ali

Intellectual 300 points

I have added the required header files as well.

0 AartiG over 6 years ago in reply to Syed Muhammad Ali

TI__Guru**** 173310 points

Your project name in the screenshot is RF430FRL152H_Default_Project while the one that I imported is named RF430FRL152H_Default_Project_With_Custom_Command_Latest.

Are you perhaps using an older version of the firmware package? I downloaded the Firmware package (slac691f) from this page (http://www.ti.com/tool/RF430FRL152HEVM), extracted the zip file and imported the projects into CCS 8.3.

The imported project names are shown below, and they all build fine without errors. I suspect there might be some inconsistency between the package version and tools version you are using. Could you please ensure you are using the latest version of the firmware package and try again?

If it still fails, we need to see the full build log, not just a screenshot of the console. This link (http://software-dl.ti.com/ccs/esd/documents/sdto_ccs_build-errors.html#ccs-build-console) shows how to save the build log. Please attach the log here.

Code Composer Studio™︎

Code Composer Studio forum

CCS/RF430FRL152HEVM: RF430FRL152