CCS/TMS570LC4357: Parasoft C++test can't run

user5126617

Prodigy 20 points

Part Number: TMS570LC4357

Tool/software: Code Composer Studio

When I start unit tests with parasoft C++test, i can connect target but the tests stop. The information is

CortexR5: Gel Output: Memory Map Setup for Flash @ Address 0x0 due to System Reset

I want to know if the configuration error cause this problem and how to resolve it.

over 6 years ago

0 Ki over 6 years ago

TI__Guru**** 463451 points

Hello,

user5126617 said:
CortexR5: Gel Output: Memory Map Setup for Flash @ Address 0x0 due to System Reset

Is this the only error? Is there any message after it?

Do you have the same issue when you try to manually connect to the target with CCS?

Thanks

0 Ki over 6 years ago in reply to Ki

TI__Guru**** 463451 points

Hello,
I haven’t heard back from you, hence this issue is being closed. If you wish to continue the discussion, please post a reply with an update below (or create a new thread).

Thanks,
ki

0 user5126617 over 6 years ago in reply to Ki

Prodigy 20 points

Yes, this is the only error run in parasoft C++test. There is no error when connect to CCS.

0 Ki over 6 years ago in reply to user5126617

TI__Guru**** 463451 points

It sounds like some environment setup issue when running from Parasoft. I don't have much experience with Parasoft hence I can't provide much assistance. I would suggest contacting Parasoft support.

Thanks
ki

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMS570LC4357: Parasoft C++test can't run