CCS/AWR1642BOOST: Vital Sign lab not working on AWR1642 boost board

ken hsieh

Part Number: AWR1642BOOST
Other Parts Discussed in Thread: AWR1642

Tool/software: Code Composer Studio

Hi,

I am able to load pre-built binary "xwr14xx_vitalSigns_lab_mss.bin" onto AWR1642 board, then try to execute vitalSignsDemo_GUI.exe but it's not working. Is there instruction of how to compile lab002 Vital Sign for AWR1642 board? thanks!

Ken

over 6 years ago

0 Jitendra Gupta over 6 years ago

TI__Guru 70050 points

Please follow the user guide available under docs directory of this lab where it explains about building steps.
And make sure that you are using AWR1642 ES2.0 version.

Regards,
Jitendra

0 ken hsieh over 6 years ago in reply to Jitendra Gupta

Intellectual 440 points

Hi Jitendra,

Yes, i am using AWR1642 ES2.0 version, but i only see vitalSignsLab_xwr1443_DevelopersGuide.pdf from industrial toolbox 3.3.1 and 2.5.2. is this the right doc for building the bin? thanks!

Ken

0 Jitendra Gupta over 6 years ago in reply to ken hsieh

TI__Guru 70050 points

Hi ken,
I just realized that you are trying to flash 'xwr14xx_vitalSigns_lab_mss.bin' to AWR1642 which will not work, as that binary is meant for xWR1443 device, not for xWR1642.
You can find Driver Vital sign demo under automotive toolbox (v2.4.7) and follow the user guide provided there.
'\mmwave_automotive_toolbox_2_4_7\labs\lab0001-driver-vital-signs\docs'

Regards,
Jitendra

0 ken hsieh over 6 years ago in reply to Jitendra Gupta

Intellectual 440 points

Hi Jitendra,

Thanks and it's working now.

Regards,

Ken

Code Composer Studio™︎

Code Composer Studio forum

CCS/AWR1642BOOST: Vital Sign lab not working on AWR1642 boost board