CCS/CCSTUDIO: CCS9 MISRA and TI RTOS

Hello,
make clean and build of the required TI-RTOS project with MISRA turned off
then deal with MISRA at your project level.

Hi, try turn on MISRA 2.1 or 5.3, you will get many warnings from RTOS files

P.S.: i use project C:\ti\simplelink_cc13x2_26x2_sdk_3_10_00_53\examples\rtos\CC1312R1_LAUNCHXL\sysbios\hello

Now I see.

You can define MISRA compliance levels for any particular source file.

It is also not a solution. If file contains #incule to RTOS file and MISRA checks is set, RTOS file will be checked to MISRA rules. My question: how turn on MISRA in my project so that this don`t check RTOS files

Alex,
which RTOS file? Could you provide an example?

Example:

I use hello RTOS project as a basis of my project.

I import: C:\ti\simplelink_cc13x2_26x2_sdk_3_10_00_53\examples\rtos\CC1312R1_LAUNCHXL\sysbios\hello

After, i wont turn on MISRA check. For example rules 2.1 and 5.1 for hello.c file. When i rebuild project, i get lot of MISRA warnings from RTOS files. Warnings is attached.warnings.txt

Alex,

Sorry I am caught up on the thread now.

Enabling the scanning for the selected set of files is the way to go but keep in mind that a #include is a preprocessor directive that essentially inserts the contents of that file into the one you are compiling.  So it is part of that file that you have the check enabled for.

I asked one of our compiler experts is there was a way to work around this.  He will reply.

Regards,

John

Alex,
only 7 initial warnings belong to TI-RTOS files.
Check this: e2e.ti.com/.../2975609

George Mock, thank you!