CCS/TMS320F28379D: Re-open the program generated by Simulink in CCS

I can;t comment much on Simulink since I have little experience with it. I assume it generates a makefile to build the executable that is loaded by the CCS debugger. Hence you are looking for a way to debug the generated executable. If that is the case, you can do a "manual" debugger launch to manually load the program and set up the debug environment:
software-dl.ti.com/.../ccs_debug-main.html

Thanks
ki

Thank you for the quick reply.

Actually I did the manual  debugger launch to manually load the program , but while  building the program I had severel errors. I managed to solve some of them but others I couldn't.

The errors are :

To solve other errors that I had , I sepecified some paths include :

Thank you 

Is "_blink_M_" a legitimate preinclude file?

Hello Meriem,

Usually, when you generate code, a CCS project file is also generated. You can import this into Code Composer Studio as a starting point to use CCS as a deploy / debugging tool.

I believe this capability was first offered in R2017a, so you might need to update your MathWorks software to a newer release. The generated project files for CCS live in the code generation folder: ...\modelname_ert_rtw\CCS_Project\

If you cant update your SW, you would need to manually create a CCS project, and import the code into that project.

Cheers,

-Brian

Hello, Thank you Brian for your answer .
Yes I already trie the solution mentioned here : ch.mathworks.com/.../358275-how-to-create-and-open-a-code-composer-studio-ccs-project-for-ti-c2000-boards-from-simulink-in-r201
but as you said it's working with matlab/2017 and more while I'm using matlab/2016 and I can't update it now.
I tried the seconde solution but I had some errors with the program that's I mentionned before. Is there any athoer solution please ?

Hello Ki-Soo Lee
I'm just a beginner with Code Composer Studio, I was just trying to solve the problems by testing the suggestings other users makes. is it a wrong step to do ?
thank you

MERIEM AFILAL said:

I'm just a beginner with Code Composer Studio, I was just trying to solve the problems by testing the suggestings other users makes. is it a wrong step to do ?

What are you trying to do? Are you working with a project generated by simulink? Or did you create one from scratch yourself? 

In any case, since you are new to CCS, I suggest you get familiar with the fundamentals of CCS with the below workshop:

http://software-dl.ti.com/ccs/esd/training/workshop/ccsv7/c2000/sdto_ccsv7_c2000-fundamentals-workshop.html

Thanks

ki