CCS / IWR1443：IWR1443

user5769257

Part Number: IWR1443
Other Parts Discussed in Thread: MMWAVE-SDK

Tool/software: Code Composer Studio

Dear team,

I want to develop an obstacle sensor with IWR1443, but I don't know how to configure this sensor. Is there any document explaining the internal structure of IWR1443 in detail?How can I configure IWR1443 with the API provided by mmWave_SDK?

thank you

over 6 years ago

0 Nitin Sakhuja over 6 years ago

TI__Mastermind 30405 points

Hello,

Please look at the following resources:

1. MMWAVE-SDK user guide. You can start by running the SDK Out of Box Demo as mentioned in the Getting Started section. Once you are familiar with it, you can explore the user guide to understand the various configuration commands and parameters used in the demo configuration file (.cfg). You can find the source and build instructions for the SDK demo in C:\ti\mmwave_sdk_02_01_00_04\packages\ti\demo\xwr14xx\mmw.

You can also find the CCS project for the SDK demo under mmWave Industrial Toolbox here:

http://dev.ti.com/tirex/explore/node?node=AN9xlYcFz8lodNaEYYZ5bw__VLyFKFf__LATEST (This is useful if you want to develop and debug using the CCS IDE, instead of using makefiles which is the default mechanism provided with the MMWAVE-SDK)

2. mmWave Industrial Toolbox: You can find various mmWave application demos complete with source code, user guides and build instructions.

For your use case, you can start with the zone occupancy Lab: http://dev.ti.com/tirex/explore/node?node=AN9xlYcFz8lodNaEYYZ5bw__VLyFKFf__LATEST

Regards

-Nitin

Code Composer Studio™︎

Code Composer Studio forum

CCS / IWR1443：IWR1443