CCS: CCS V9 emulator support

Hello,

Thanks for the reply.  We're doing both C28X and C67X.  Can you recommend specifically, based on that?

Robert

Robert Wolfe said:

Thanks for the reply.  We're doing both C28X and C67X. 

Depends on which C67x device. If it is C671x or C672x, then you would need the XDS560v2. If it is C674x, then the XDS200 is also an option. 
I would recommend looking at the TI product page for the specific device(s) you are using and under the 'Design and Development" tab you should find the list of supported debug probes. For example: http://www.ti.com/product/TMS320C6748/toolssoftware

Both of those debug probes will work with C28x. Ultimately it comes down to a choice based on cost, feature and performance requirements.

This page is a good reference to have an idea about performance comparison across debug probes: 
http://software-dl.ti.com/ccs/esd/documents/application_notes/appnote-debug_probe_performance_results.html

Also the XDS510USB can still be used with CCS versions up till 8.3.1. 

AartiG said:

Depends on which C67x device. If it is C671x or C672x, then you would need the XDS560v2.

We're on C674X.  But it says here XDS560v2 JTAG will do anything except C67x? 

"http://www.ti.com/tool/tmdsemu560v2stm-ue"

"Basic JTAG debug supports most TI microcontrollers (except MSP430), all wireless MCUs, most DSPs (except C54x, C62x, C67x) and all ARM processors"

Or maybe I've misunderstood it?

Thanks,

Robert