• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 53 subscribers
  • Views 321 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CCS/TLV320AIC3106: <<<TDM Mode(I2S Mode) data,,,>>> How to convert TDM Mode(I2S Mode) data to "Waveform data"??

CCS/PROCESSOR-SDK-OMAPL137: CCS/TLV320AIC3106: How to read and process signal from LINE IN using CCS?

Quoc Anh Le1
Prodigy 10 points
Part Number: PROCESSOR-SDK-OMAPL137
Other Parts Discussed in Thread: TLV320AIC3106

Tool/software: Code Composer Studio

Hi, my EVM is OMAP L137 with DSP core (C6747) that used TLV320AIC3106

I have install: processor sdk rtos omapl137 04_03_00_05 and use CCS v7.4.0

I can build PDK example from  pdkProjectCreate.bat. The example for MCASP to take input signal from line in and feed it to AIC3106 codec, after that take the same signal out through line out.

I want to take input signal make some technical about processing signal (like DFT, FFT, ect...) and through to line out. 

Can you give me some suggestions or documents ect...

Thank you,

Sorry about my bad English!