• Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 176 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Problems about emulate my owm program on TMS320C6472EVM()

战刀
Prodigy 20 points

    Hello, I am new to TMS320C6472EVM, and there seems to be some troubles when i want to emulate my owm program on TMS320C6472EVM , it seems that i can't connect  the target board.I send the datails in the file"0777.problems about TMS320C6472EVM.doc"  as an accessory, wish you can spare me a few minutes to have a view of the doucument.  

   Your help is highly appreciated!

  • TI__Guru**** 173310 points

    In the attached document there seem to be errors when loading the program as well as connection errors. Some things to check that might help identify the issue:

    - Try going through the steps to connect to target, load code etc. manually in CCS by doing the following:
    After building your project in CCS, instead of clicking on "Debug Active Project", right-click on your target configuration file (.ccxml) and do "Launch Selected Configuration". When the session is launched, right-click on core A and select "Connect  Target". Does this connect successfully? Then try to load your program.

    - make sure your target configuration includes the correct GEL file from the Software Development Kit provided by the board manufacturer