• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 53 subscribers
  • Views 634 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TMS320F2812: ezDSP TMS320F2812 Processor

abhishek gota
Prodigy 231 points

Part Number: TMS320F2812

Tool/software: Code Composer Studio

Hi All ..

            When setting up target configuration for spectrum digital ezDSP F2812 , I do not see a connection for BlackHawk C2000 USB connector in CCS v9.1 , Can you please provide the steps for configuring

ezDSP2812 using using BlackHawk c2000 connector in CCS v9.1.

  • 0
    TI__Guru**** 163015 points

    Abhishek,

    The F2812 eZdsp has an onboard XDS510 class debug probe.  This is not support by CCSv9.0 or later as CCS is a 64bit application.  The newest version that supports that class of debug probe is CCSv8.3.

    Alternatively you could use CCSv9.1 but you would need to connect an external debug probe.

    Regards,

    John