CCS/LAUNCHXL-CC2640R2: DRV8711

Lucas Burton

Part Number: LAUNCHXL-CC2640R2
Other Parts Discussed in Thread: DRV8711, DRV8711EVM

Tool/software: Code Composer Studio

trying to get this launchpad to work with the DRV8711 stepper motor control. i cant get any TI sample code to work!! i need it to spin a TF mini as part of my LIDAR project.

over 6 years ago

0 Pablo Armet over 6 years ago

TI__Mastermind 37683 points

Hi Lucas,

I need some time to take a look at this issue. You should expect a reply from me by Oct 17.

Thank you in advance for your patience.

0 Pablo Armet over 6 years ago in reply to Pablo Armet

TI__Mastermind 37683 points

Hi Lucas,

I am sorry for the delayed response.

To get a better understanding of the problem you are facing, I have a couple questions,

Are you able to verify if the code was successfully uploaded to the launchpad?
Are you able to see any signals coming from the launchpad's outputs going to the DRV8711?
Are you using the TI's DRV8711EVM board or your own board?
Are you able to see any signals coming from the outputs of the DRV8711 going to the TF mini?

I will wait for your response

0 Pablo Armet over 6 years ago in reply to Pablo Armet

TI__Mastermind 37683 points

Hi Lucas,

Do you have any updates?

0 Pablo Armet over 6 years ago in reply to Pablo Armet

TI__Mastermind 37683 points

Hi Lucas,

Has your issue been resolved?

0 Pablo Armet over 6 years ago in reply to Pablo Armet

TI__Mastermind 37683 points

Hi Lucas,

I assume your issue has been resolved. I will close this thread but you can still reply to this post. If the thread is locked, click on "Ask a related question" to get further assistance.

Code Composer Studio™︎

Code Composer Studio forum

CCS/LAUNCHXL-CC2640R2: DRV8711