CCS/AWR1642BOOST: API using problem

user6199395

Prodigy 30 points

Part Number: AWR1642BOOST
Other Parts Discussed in Thread: AWR1642

Tool/software: Code Composer Studio

Hi,

I'm using AWR1642 BOOST (ES1.0) + DCA1000EVM (FPGA = v2.7) + mmWave studio (v2.0)

And I want to know if I can set up any parameter that keep running the software for 100 times at once?

over 6 years ago

0 Cesar over 6 years ago

TI__Guru**** 152104 points

Hi,

mmWave studio 2.0 does not support AWR1642 ES 1.0.

You would need to use mmWave studio 1.0.

You can configure the data capture for 100 frames

Thank you

Cesar

0 user6199395 over 6 years ago in reply to Cesar

Prodigy 30 points

Hi,

Sorry I'm using AWR1642 BOOST (ES2.0) + DCA1000EVM (FPGA = v2.7) + mmWave studio (v2.0),we want to collect the raw data for 100 loops , is that possible to use another software or program like (labview) with awr1642?

because if we use mmwave studio we can only get single raw data at once and I need to run for 100 times by myself.

thank you

0 Cesar over 6 years ago in reply to user6199395

TI__Guru**** 152104 points

Hi,

mmWave Studio supports LUA scripting language.

It is possible to write a LUA script to perform the test 100 times

Please see an example of a loop implemented in LUA

C:\ti\mmwave_studio_02_00_00_02\mmWaveStudio\Scripts\125cLoop.lua

Thank you

Cesar

0 user6199395 over 6 years ago in reply to Cesar

Prodigy 30 points

Hi,

I want to know if TI provide how to use the LUA with the mmWave Studio to perform the test 100 times?

Thank you very much.

Dong

0 Cesar over 6 years ago in reply to user6199395

TI__Guru**** 152104 points

HI,

I provided you a link to an example of LUA script. Please use this as a starter point to create your own script

thank you

Cesar

Code Composer Studio™︎

Code Composer Studio forum

CCS/AWR1642BOOST: API using problem