CCS/TM4C1294NCPDT: TM4C1294NCPDT

Kashif Khan

Tool/software: Code Composer Studio

Hello All,

We are using the TM4C1294NCPDT Evolution Kit. We tried to program the board using CCS debugger but it is showing an error:

"CORTEX_M4_0: Error connecting to the target".

Thanks,

Kashif Khan

over 6 years ago

0 desouza over 6 years ago

TI__Guru**** 171879 points

Kashif,

I haven't heard about a Evolution kit for this device and there are not enough details to make an assessment about the problem with the board. I suggest you to look at the Debugging JTAG page below, which contains troubleshooting suggestions for both hardware and software.

https://software-dl.ti.com/ccs/esd/documents/ccs_debugging_jtag_connectivity_issues.html

Also, check the common target configurations with information about how to setup the board in CCS.

https://software-dl.ti.com/ccs/esd/documents/application_notes/appnote-common_target_configurations.html

Regards,

Rafael

Code Composer Studio™︎

Code Composer Studio forum

CCS/TM4C1294NCPDT: TM4C1294NCPDT