how to config ccs4 for ipnc368?

Hello,

From what i understand, a DM368 is similar to a DM365. I would guess that you can use that DM365 configuration but perhaps you need to change the startup GEL file. You can change it from the "Advanced" tab of the target configuration editor:

If changing the GEL file does not help, could you describe in more detail the "hang"? Also what is the full version number of you CCS install?

Wonder Won said:

In addtion, how to "load gel file" as ipnc368 user guide said? I can't find any menu in ccs4.

See: http://processors.wiki.ti.com/index.php/GEL#Loading_GEL_Files

Thanks

ki

Hi, Lee,

I setting the ipnc368 gel file like your caputure picture. I encountered the "hang up" situation is flowing,

It seems ccs can't connect to xds560 or target board, but I install  and configure ccs  and xds560 driver as it user guide, power on xds560, connected it with working target board. When I "Lanch Ti Debugger", ccs stay at the "Lanch Debug Session" dialog window forever, have not any error information.

One thing to try is to run some diagnostics to verify your physical connection. I see you are using a SEED emulator. If SEED comes with any diagnostics tools, you should try running those.

Also see this topic on debugging JTAG connectivity issues:

http://processors.wiki.ti.com/index.php/Debugging_JTAG_Connectivity_Problems

Thanks

ki

Strangely It works correctly someday, I confirm I did not do any config modification about ccs. I don't kown why?