CCS / IWR1843BOOST： Single millimeter wave IWR1843 board subframe format

HI, there:

I do not think you can find the whole frame of ADC raw data in out-of-box demo.    I think only the range FFT output is saved in radarCube.   The ADC data is not preserved for the whole frame.

If you are looking for range FFT output, you can find the format below:

file:///C:/ti/mmwave_sdk_03_03_00_03/packages/ti/datapath/dpu/rangeproc/docs/doxygen/html/group___d_p_i_f___r_a_d_a_r_c_u_b_e___f_o_r_m_a_t.html

Best,

Zigang

Even if it is not complete frame data, I would like to ask what is the data format of the partial chirps sequence of the ADC extracted by a single board IWR1843? I want to parse and then process

I learned that someone can get raw data from a board and process it. I just want to know the data format of the ADC on a board to analyze it. Thank you

You can load the memo code through CCS and set breakpoints to check the ADC values.  You can read through the code to understand where you can do that. 

You can start with this file:

file:///C:/ti/mmwave_sdk_03_03_00_03/packages/ti/demo/xwr18xx/mmw/docs/doxygen/html/index.html

You can read through "Data Path" first.

Best,

Zigang