CCS/CC2640R2F: Battery Monitor

akshay chougule

Part Number: CC2640R2F

Tool/software: Code Composer Studio

HELLO ALL,

I have designed custom CC2640R2F board n i want to monitor Battery voltage (CR2032) so is there any hardware configuration in design please let me know. How can I read the battery voltage level?

Thank You!

over 6 years ago

0 Severin Suveren over 6 years ago

TI__Mastermind 23730 points

Hi akshay,

You can for instance use the Sensor Controller to do battery voltage monitoring. There already exists an example in Sensor Controller Studio for a battery voltage monitor.

Learn about the Sensor Controller here: http://dev.ti.com/tirex/explore/node?node=ACM1I4m9AXxcH-booxaNDg__krol.2c__LATEST

The example in question is called "Task Control" under the LaunchPad folder in the start page, and the project should contain a task which is called Battery Voltage Monitor.

0 Markel Robregado over 6 years ago

Guru 86865 points

Just use the battservice.

-kel

Code Composer Studio™︎

Code Composer Studio forum

CCS/CC2640R2F: Battery Monitor