Code Composer Studio™︎

Code Composer Studio forum

State TI Thinks Resolved
Locked Locked
Replies 4 replies
Answers 2 answers
Subscribers 54 subscribers
Views 516 views
Users 0 members are here

Support feedback

Options

Options

Related

CCS/TM4C1294NCPDT: ccs

srinivasan Bhuramoorthy

Intellectual 460 points

Part Number: TM4C1294NCPDT
Other Parts Discussed in Thread: SYSBIOS

Tool/software: Code Composer Studio

Hey,

I am using windows 10 machine and CCS v9.2.0.00013 . But I am not able to use CCS as it shows error that sysbios.knl is not compatible with the XDCTools.

Please let me know how to solve this issue.

Regards,

over 5 years ago

0 AartiG over 5 years ago

TI__Guru**** 173310 points

Are you using TI-RTOS for TivaC? If so, you would need to use a XDCtools version that is compatible with TI-RTOS.

Please see this related thread.

You can download and install a specific version of XDCtools from this page. After installing, make sure to select that version from inside the project properties.
For more information on installing and selecting different versions of products like XDCtools, refer to this page: http://software-dl.ti.com/ccs/esd/documents/ccs_product-installation-selection.html

0 srinivasan Bhuramoorthy over 5 years ago in reply to AartiG

Intellectual 460 points

Hey Aarti,

Thanks for the reply.

I am using TI-RTOS v2.16.0.08 and it recommened to use XDCtoll version above 3.5 or later.

I am using the same required version of XDCtools for the TI-RTOS. But still it shows error.

please help me solve this .

Thanks and regards,

Srinivasan.

0 srinivasan Bhuramoorthy over 5 years ago in reply to AartiG

Intellectual 460 points

Hey Aarti,

Thanks for the reply.

I am using TI-RTOS v2.16.0.08 and it recommened to use XDCtoll version above 3.5 or later.

I am using the same required version of XDCtools for the TI-RTOS. But still it shows error.

please help me solve this .

Thanks and regards,

Srinivasan.

0 AartiG over 5 years ago in reply to srinivasan Bhuramoorthy

TI__Guru**** 173310 points

srinivasan Bhuramoorthy said:
I am using TI-RTOS v2.16.0.08 and it recommened to use XDCtoll version above 3.5 or later.

Actually the thread I referenced and the Release Notes for TI-RTOS v2.16.0.08 both recommend using XDCtools v3.32.00.06, not a 3.5 version.

Please install v3.32.00.06 from this page and set your project to use it.