• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 54 subscribers
  • Views 162 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/LAUNCHXL-F28069M: Select Emulators

Maria MJ
Intellectual 340 points
Part Number: LAUNCHXL-F28069M


Tool/software: Code Composer Studio

Dear TI team, 

I recognized after installing ccsv9, I haven't chosen while selecting the emulators, the Spectrum digital emulators, while reading in the questions posted, one of the members recommended to select it. 

Is it possible to re-select it after installation ? please guide me how to . Does it have an impact on loading the code to the board or an issue on making it run ? 

Thanks, 

  • 0
    TI__Guru**** 162905 points

    Maria,

    That option only needs to be selected if you are using a Spectrum Digital XDS560 class debug probe or a Spectrum Digital development board.  If you are using F28069M then that is likely not the case.

    Regards,

    John