CCS/TMS320F28027F: error #10234-D: unresolved symbols remain

Srijeeth J

Part Number: TMS320F28027F

Tool/software: Code Composer Studio

Hi All,

I am a beginner, trying to build an available (in-built) LED-BLINK program in CCS_v9. I resolved some of the errors by adding the necessary source files, but these errors still remain and i am unable to solve it.

Please help with the unresolved symbol error. The image of the error list generated is shown below.

Many thanks in advance!

over 5 years ago

0 Srijeeth J over 5 years ago

Prodigy 170 points

Hi,

I am referring to: Example_2802xGpioToggle.c

Haven't modified anything in the code. Created a new CCS project and tried to build.

Encountered these unresolved symbol error.

Kindly help.

0 desouza over 5 years ago in reply to Srijeeth J

TI__Guru**** 171074 points

Hi,

Please check additional details about this error and tips to correct it at the Project Import and Build Errors page: (search for the error number)

https://software-dl.ti.com/ccs/esd/documents/sdto_ccs_build-errors.html

Hope this helps,

Rafael

0 Srijeeth J over 5 years ago in reply to desouza

Prodigy 170 points

Hi Rafael,

I have checked these links already, but still unable to decode the error with these information.

The information provided is not complete. Please support to solve this error.

0 desouza over 5 years ago in reply to Srijeeth J

TI__Guru**** 171074 points

Hi,

As the reference says, you need to find the path or library to which files contain the missing symbols mentioned in the error message.

Specifically for these symbols, many previous reports can be found on e2e - one of the relevant ones is:

https://e2e.ti.com/support/tools/ccs/f/81/p/334607/1167637#1167637

That said, the best starting point is to import an existing example project and then modify it to your needs. This way you start from a known good working place.

Regards,

Rafael

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMS320F28027F: error #10234-D: unresolved symbols remain