CCS/BOOSTXL-SENSORS: Interfacing BOOSTXL-SENSOR pack and TIVA C TM4C123GH6PM

Manu Devappa

Part Number: BOOSTXL-SENSORS
Other Parts Discussed in Thread: TM4C123GH6PM, MSP-EXP430FR5994, TMP006, EK-TM4C123GXL

Tool/software: Code Composer Studio

I tried to interface TM4C123GH6PM and BOOSTXL-SENSOR PACK but i failed. i search and referred number of tutorials but i couldn't find solution. anyone please help us to interface tiva c TM4C123GH6PM and SENSOR BOOSTXL pack.

Image result for boostxl-sensor pack datasheet

over 5 years ago

0 Bob Crosby over 5 years ago

TI__Guru 72500 points

While the BOOSTXL-SENSORS booster pack is hardware compatible with the TM4C123GXL Launchpad, all of the example software is for MSP-EXP430FR5994 or MSP-EXP432P401R launchpads.

0 Manu Devappa over 5 years ago in reply to Bob Crosby

Prodigy 50 points

Thank you for your answer Mr.Bob Crosby, Do you have any idea about interfacing TM4C123GXL and BOOSTXL-SENSORS ? if yes please share with us we are searching for it from long time.

0 Bob Crosby over 5 years ago in reply to Manu Devappa

TI__Guru 72500 points

Sorry, you can look at the examples in "C:\ti\TivaWare_C_Series-2.1.4.178\examples\boards\ek-tm4c1294xl-boostxl-senshub", but none of the sensors on the BOOSTXL-SENSORS is the same as on the older BOOSTXL_SENSHUB. The TMP007 is close to the TMP006, but even that sensor is attached to a different I2C module.

0 Markel Robregado over 5 years ago in reply to Manu Devappa

Guru 86765 points

Hi,

The BOOSTXL-SENSORS is pin compatible with EK-TM4C123GXL. The example programs for BOOSTXL-SENSORS are for Simplelink MCU's and can be found below. So, to make the BOOSTXL-SENSORS work for EK-TM4C123GXL, you need to implement code to communicate with the I2C sensors.

http://www.ti.com/tool/download/SIMPLELINK-SDK-SENSOR-ACTUATOR-PLUGIN

-kel

Code Composer Studio™︎

Code Composer Studio forum

CCS/BOOSTXL-SENSORS: Interfacing BOOSTXL-SENSOR pack and TIVA C TM4C123GH6PM